We are the Manufacturers & exporters of a wide variety of "Cutting Tools".
Some of the standard cutting tools are:
|
|
|
|
|
|
|
We are the Manufacturers & exporters of a wide variety of "Cutting Tools". Some of the standard cutting tools are: |
|
Art 401 |
||
 |
||
|
Art 402 |
SINGLE
FLUTE
COUNTER SINK |
 |
|
|
||
|
Art 403 |
COMBINED DRILL
AND COUNTER SINKS |
|
|
|
||
|
Art 404 |
TOOL BITS (CUT
OFF BLADE) |
|
|
|
||
|
Art 405 |
TOOL BITS
(RECTANGULAR) |
|
|
|
||
|
Art 406 |
TOOL BITS
(SQUARE) |
|
|
|
||
|
Art 407 |
TOOL BITS
(ROUND) |
|
|
|
||
|
Art 408 |
REAMERS
ADJUSTABLE HAND |
|
|
|
||
|
Art 409 |
REAMERS
REPAIRMENS (TAPER) |
|
|
|
||
|
Art 410 |
||
|
|
||
|
Art 411 |
TAPS (CARBON) UNC-UNF |
|
|
|
||
|
Art 412 |
TAPS CARBONS (BSW-BSF)
|
|
|
|
||
|
Art 413 |
TAPS DIES
(HEXAGONAL) |
|
|
|
||
|
Article No :- 401 |
||
|
|
||
|
|
Versatility of cutting in any direction | |
|
|
Built in Chip Breaker Groove. Ready to use | |
|
|
No. Grinding - No Tool Resetting. Economical Alternative to Brazed Tool Tips. | |
|
|
Supplied without Inserts. | |
|
Article No :- 401 |
||
|
Cat No
|
Size |
||
|
Small Dia |
Large Dia | ||
|
mm |
mm |
||
| CS-1301 | 0 Double End | 2 | 5 |
| CS-1302 | 1 Single End | 5 | 10 |
| CS-1303 | 2 Single End | 10 | 15 |
| CS-1304 | 3 Single End | 15 | 20 |
| CS-1305 | 4 Single End | 20 | 25 |
|
NOTE: Available in 82° and 90° |
|||
|
Article No :- 402 |
||
 |
|
Designed for Machine use and light, portable work |
|
|
Ideal for Chamfering, Debarring and Counter Sinking | |
|
|
Single Flute construction and low controlled relief provide chatter less operation and smooth surface finish | |
|
|
Versatility of this tool should increase productivity on all general purpose applications | |
|
|
Available in 60°, 82° or 90 | |
|
|
Made from High Speed Steel | |
| Also available in six flute | ||
|
Article No :- 402 |
||
| Cat No | Size | Shank Dia. | Overall Length | ||
| 60° |
82°
|
90°
|
|||
| SFC - 1301 | SFC - 1313 | SFC - 1324 | 3/16 | 3/16 | 1-1/2 |
| SFC - 1302 | SFC - 1314 | SFC - 1325 | 1/4 | 1/4 | 2 |
| SFC - 1303 | SFC - 1314 | SFC - 1326 | 5/16 | 1/4 | 2 |
| SFC - 1304 | SFC - 1315 | SFC - 1327 | 3/8" | 1/4" | 2" |
| SFC - 1305 | SFC - 1316 | SFC - 1328 | 1/2" | 1/4" | 2 |
| SFC - 1306 | SFC - 1317 | SFC - 1329 | 5/8" | 1/2" | 2-1/4 |
| SFC - 1307 | SFC - 1318 | SFC - 1330 | 3/4" | 1/2"" | 2-3/4 |
| SFC - 1308 | SFC - 1319 | SFC - 1331 | 7/8" | 1/2" | 2-3/4 |
| SFC - 1309 | SFC - 1320 | SFC - 1332 | 1" | 1/2" | 2-3/4 |
| SFC - 1310 | SFC - 1321 | SFC - 1333 | 1-1/4" | 3/4" | 3" |
| SFC - 1311 | SFC - 1322 | SFC - 1334 | 1-1/2" | 3/4" | 3-3/8" |
| SFC - 1312 | SFC - 1223 | SFC - 1335 | 2" | 3/4" | 3-3/4" |
|
Article No :- 403 |
||
|
|
||
|
|
Used for Producing Center holes in Components or Work pieces which requires machining between Centers. | |
|
|
60° Countersink Angle fits all Standard Centers | |
|
|
Plain type available in 60°, 82°, or 90° Angle, also available with standard and Long Lengths | |
|
|
Made from High Speed Steel | |
|
Article No :- 403 |
||
| Cat No | Size |
Body Dia. |
Drill Dia. |
Overall Length |
|
A |
D |
L |
||
| SFC - 1336 |
00 |
1/8 |
.025 |
1-1/8 |
| SFC - 1337 |
0 |
1/8 |
1/32 |
1-1/8 |
| SFC - 1338 |
1 |
1/8 |
3/64 |
1-1/4 |
| SFC - 1339 |
2 |
3/16 |
5/64 |
1-7/8 |
| SFC - 1340 |
3 |
1/4 |
7/64 |
2 |
| SFC - 1341 |
4 |
5/16 |
1/8 |
2-1/8 |
| SFC - 1342 |
4-1/2 |
3/8 |
9/64 |
2-1/2 |
| SFC - 1343 |
5 |
7/16 |
3/16 |
2-3/4 |
| SFC - 1344 |
6 |
1/2 |
7/32 |
3 |
| SFC - 1345 |
7 |
5/8 |
1/4 |
3-1/4 |
| SFC - 1346 |
8 |
3/4 |
5/16 |
3-1/2 |
| SFC - 1347 |
9 |
7/8 |
11/32 |
3-5/8 |
| SFC - 1348 |
10 |
1 |
3/8 |
3-3/4 |
|
NOTE: Please mention the angle while ordering. |
||||
|
Article No :- 404 |
||
|
|
||
|
|
Made from high speed steel. | |
|
Article No :- 404 |
||
| Cat. No. For |
Size of Blade |
||
| Width | Height | Length | |
|
TB-1349 |
1/16 |
5/16 |
3-1/2 |
|
TB-1350 |
3/32 |
1/2 |
4 |
|
TB-1351 |
3/32 |
5/8 |
5 |
|
TB-1352 |
1/8 |
3/4 |
6 |
|
TB-1353 |
1/8 |
7/8 |
6 |
|
TB-1354 |
3/16 |
1 |
6 |
|
TB-1354 |
3/16 |
1-1/8 |
6 |
| NOTE: Available in M2 and 5% Cobalt | |||
|
|
|
Article No :- 405 |
||
|
|
||
|
|
Made from high speed steel. | |
|
Article No :- 405 |
||
|
Cat No |
Size | |
| M-2 Steel | 5% Cobalt | |
|
TB-1355 |
TB-1372 |
1/4 x 3/8 x 3 |
|
TB-1356 |
TB-1373 |
1/4 x 3/8 x 4 |
|
TB-1357 |
TB-1374 |
1/4 x 1/2 x 4 |
|
TB-1358 |
TB-1375 |
1/4 x 3/4 x 5 |
|
TB-1359 |
TB-1376 |
1/4 x 1 x 6 |
|
TB-1360 |
TB-1377 |
3/8 x 1/2 x 4 |
|
TB-1361 |
TB-1378 |
3/8 x 5/8 x 5 |
|
TB-1362 |
TB-1379 |
3/8 x 3/4 x 5 |
|
TB-1363 |
TB-1380 |
3/8 x 1 x 6 |
|
TB-1364 |
TB-1381 |
1/2 x 3/4 x 5 |
|
TB-1365 |
TB-1382 |
1/2 x 1 x 6 |
|
TB-1366 |
TB-1383 |
1/2 x 1-1/2x 6 |
|
TB-1367 |
TB-1384 |
5/8 x 3/4 x 5 |
|
TB-1368 |
TB-1385 |
5/8 x 1 x 6 |
|
TB-1369 |
TB-1386 |
5/8 x 1-1/4x 6 |
|
TB-1370 |
TB-1387 |
3/4 x 1 x 6 |
|
TB-1371 |
TB-1388 |
3/4 x 1-1/4x 6 |
|
Article No :- 406 |
||
 |
||
|
|
Made from high speed steel. | |
|
Article No :- 406 |
||
|
Cat No. |
Size | ||
| M-2 | 5% Cobalt | 10% Cobalt | |
| TB-1389 | TB-1401 | TB-1413 | 1/8 x 2-1/2 |
| TB-1390 | TB-1402 | TB-1414 | 3/16 x 2-1/2 |
| TB-1391 | TB-1403 | TB-1415 | 1/4 x 2-1/2 |
| TB-1392 | TB-1404 | TB-1416 | 5/16 x 2-1/2 |
| TB-1393 | TB-1405 | TB-1417 | 3/8 x 3 |
| TB-1394 | TB-1406 | TB-1418 | 7/16 x 3-1/2 |
| TB-1395 | TB-1407 | TB-1419 | 1/2 x 4 |
| TB-1396 | TB-1408 | TB-1420 | 5/8 x 4-1/2 |
| TB-1397 | TB-1409 | TB-1421 | 3/4 x 6 |
| TB-1398 | TB-1410 | TB-1422 | 7/8 x 6 |
| TB-1399 | TB-1411 | TB-1423 | 1 x 6 |
| TB-1400 | TB-1412 | TB-1424 | 1-1/4 x 6 |
|
Article No :- 407 |
||
|
|
||
|
|
Made from high speed steel. | |
|
Article No :- 407 |
||
|
Cat. No. M-2 Steel |
Size |
| TB-1425 |
1/8 x 2-1/2 |
| TB-1426 |
3/16 x 3-1/2 |
| TB-1427 |
1/4 x 2 |
| TB-1428 |
1/4 x 4 |
| TB-1429 |
5/16 x 4-1/2 |
| TB-1430 |
3/8 x 5 |
| TB-1431 |
7/16 x 4 |
| TB-1432 |
7/16 x 5-1/2 |
| TB-1433 |
1/2 x 6 |
| TB-1434 |
5/8 x 6 |
| TB-1435 |
3/4 x 6 |
|
|
|
Article No :- 408 |
||
 |
||
|
|
Each Reamer expands to the smallest size of next larger size | |
|
|
Reamers are used for light cut, repair work, removing stock or simply for enlarging holes | |
|
|
Reamers can be hand operated by use of wrenches. The size can be adjusted by moving the blades in tapered slots by means of loosening one nut and tightening the other. | |
|
Article No :- 408 |
||
|
Cat No.
|
Size |
Range |
No. of Blades | |
| Inch | mm | |||
| AHR - 1436 | 8/A | 1/4 to 9/32 | 6.35 to 7.14 |
4 |
| AHR - 1437 | 7/A | 9/32 to 5/16 | 7.14 to 7.94 |
4 |
| AHR - 1438 | 6/A | 5/16 to 11/32 | 7.94 to 8.73 |
4 |
| AHR - 1439 | 5/A | 11/32 to 3/8 | 8.73 to 9.52 |
5 |
| AHR - 1440 | 4/A | 3/8 to 13/32 | 9.52 to 10.32 |
6 |
| AHR - 1441 | 3/A | 13/32 to 7/16 | 10.32 to 11.11 |
6 |
| AHR - 1442 | 2/A | 7/16 to 15/32 | 11.11 to 11.91 |
6 |
| AHR - 1443 | A | 15/32 to 17/32 | 11.91 to 13.49 |
6 |
| AHR - 1444 | B | 17/32 to 19/32 | 13.49 to 15.08 |
6 |
| AHR - 1445 | C | 19/32 to 21/32 | 15.08 to 16.67 |
6 |
| AHR - 1446 | D | 21/32 to 23/32 | 16.67 to 18.26 |
6 |
| AHR - 1447 | E | 23/32 to 25/32 | 18.26 to 19.84 |
6 |
| AHR - 1448 | F | 25/32 to 27/32 | 19.84 to 21.43 |
6 |
| AHR - 1449 | G | 27/32 to 15/16 | 21.43 to 23.81 |
6 |
| AHR - 1450 | H | 15/16 to 1-1/16 | 23.81 to 26.99 |
6 |
| AHR - 1451 | I | 1-1/16 to 1-3/16 | 26.99 to 30.16 |
6 |
| AHR - 1452 | J | 1-3/16 to 1-11/32 | 30.16 to 34.13 |
6 |
| AHR - 1453 | K | 1-11/32 to 1-1/2 | 34.13 to 38.10 |
6 |
| AHR - 1454 | L | 1-1/2 to 1-13/16 | 38.10 to 46.04 |
6 |
| AHR - 1455 | M | 1-13/16 to 2-7/32 | 46.04 to 56.36 |
6 |
| AHR - 1456 | N | 2-7/32 to 2-3/4 | 56.36 to 69.85 |
6 |
| AHR - 1457 | O | 2-3/4 to 3-11/32 | 69.85 to 84.93 |
6 |
|
|
|
Article No :- 409 |
||
 |
||
|
|
Removes burrs from small Holes | |
|
|
Enlarges and Countersinks holes in soft metals. |
|
|
|
Handy Tool for Mechanics, Electricians, Plumbers | |
|
Article No :- 409 |
||
|
Cat No. |
Range |
|
