Fastener Anchor

Products Of Any Type/Dimension Can Be Manufactured As Per Requirements; Customers’ Designs And Logos Are Welcome.

We are the Manufacturers & exporters of a wide variety of "Fastener Anchors Concrete anchors hardware".

Some of the standard Fastener Anchors are:
   
Art 801    Drop-in Anchor
 
Art 802    Drop Anchor (brass)
 
Art 803   Hammer Strike Anchor
Art 804    Hit Pin (zinc alloy body)
 
Art 805    Sleeve Anchor
 
Art 806    Sleeve All Anchor
 

Art 807

    Sleeve Anchor
 

Art 808

    Tam Anchor    
   

Art 809

   Shield Type  3 or 4 Hook Anchor

    
   

Art 810

    Shield Type Hook & Eye Anchor

  
   

Art 811

     Wedge Anchor  
   

Art 812

     Ceiling Anchor  
   

Art 813

    Safety Anchor  
   

Art 814

     Cavity Anchor  
   

Art 815

     Set Anchor  
   

Art 816

     Undercut Anchor  
   

Art 817

   High Load Anchor  
   
     

 

Drop-in Anchor

Article No :- 801

 

A drop in Anchor Consist of Zinc plated tublor expansion shield which has four equally  spaced slots on position of it's length. The bottom part of the shield can be knurled as per requirement and specially designed bullet in plug which ensures fill expansion of anchor. Suitable for fixing of light equipment to ceiling & wall's.

The Product is available in
MS-CARBON STEEL and STAINLESS STEEL 304  & 316
 

As per clients requirements

     
     

Article No :- 801

Dimensions in Inches
Cat No Thread Size Pitch Thread Length Outside Dia Full Length
GF/DA-2501 1/4  20 7/16 3/8 1
GF/DA-2502 5/16 18 1/2 7/16 1-1/8
GF/DA-2503 3/8 16 5/8 1/2 1-9/16
GF/DA-2504 1/2 12 1-1/8 5/8 2
GF/DA-2505 1/2 13 UNC 1-1/8 5/8 2
GF/DA-2506 5/8 11 1-1/4 7/8 2-1/2
 

Dimensions in MM
Cat No Thread Size Pitch Thread Length Outside Dia Full Length
GF/DA-2507 M-6 1 M-11 M-8 M-25
GF/DA-2508 M-8 1.25 M-13 M-10 M-30
GF/DA-2509 M-10 1.50 M-16 M-12 M-40
GF/DA-2510 M-10 1.50 M-16 M-13 M-40
GF/DA-2511 M-12 1.75 M-18 M-15 M-50
GF/DA-2512 M-12 1.75 M-18 M-16 M-50
GF/DA-2513 M-14 2.00 M-20 M-18 M-55
GF/DA-2514 M-16 2.00 M-22 M-20 M-65

Article No :- 801

APPLICATION & INSTALLATION

Drill to specify diameter and depth.

Use setting tool & hammer to drive plug in.

Anchor is set with bolt.

TOP

 

 

Drop Anchor (brass)

Article No :- 802
     
   
 

Internal thread and shallow depth. Anchor flush with surface of base material after removal of fixture. Ideal for cable tray, suspended pipe works, electrical works, electrical works, air conducting, sprinkler support system material : Brass .
 

 

 
   
 
 
 
   
   
     

Article No :- 802

Dimensions in Inches
Cat No Thread Size Pitch Thread Length Outside Dia Full Length
GF/BDA-2515 1/4 20 5/8 5/16 1
GF/BDA-2516 1/4 20 3/4 5/16 1-1/4
GF/BDA-2517 5/16 18 7/8 7/16 1-1/8
GF/BDA-2518 5/16 18 7/8 7/16 1-1/4
GF/BDA-2519 3/8 16 7/8 1/2 1-1/4
GF/BDA-2520 3/8 16 7/8 1/2 1-1/2
GF/BDA-2521 1/2 12 1 5/8 1-1/2
GF/BDA-2522 1/2 12 1 5/8 2
GF/BDA-2523 1/2 13 1 5/8 1-1/2
GF/BDA-2524 1/2 13 1 5/8 2

Dimensions in MM
Cat No Thread Size Pitch Thread Length Outside Dia Full Length
GF/BDA-2525 M-6 1 16-M 8-M 25-M
GF/BDA-2526 M-6 1 20-M 8-M 30-M
GF/BDA-2527 M-8 1.25 20-M 10-M 30-M
GF/BDA-2528 M-8 1.25 24-M 10-M 35-M
GF/BDA-2529 M-10 1.50 24-M 12-M 35-M
GF/BDA-2530 M-10 1.50 25-M 12-M 40-M
GF/BDA-2531 M-12 1.75 25-M 15-M 45-M
GF/BDA-2532 M-12 1.75 25-M 15-M 50-M

Article No :- 802

APPLICATION & INSTALLATION

Drill to specify diameter and depth.

Use setting tool & hammer to drive plug in.

Anchor is set with bolt.

TOP

 

Hammer Strike Anchor

Article No :- 803
   

 

The hammer anchor is an impact expansion type concrete anchor. The Anchor is manufactured of steel. It's Top end is threaded and the bottom has four equal spaced slots. The anchor has a hole that extends thrill its entire length. The drive pin is inserted at the top end and when hammered in, It expands the bottom of the anchor. The entire anchor is zinc plated suitable for concrete, timber, blocks bricks, metal railings, gates machinery.
 
 
 
 
   

The Product is available in
MS-CARBON STEEL and STAINLESS STEEL 304  & 316
   

As per clients requirements

     
     

Article No :- 803

Dimensions in Inches
Cat No Thread Size Pitch Thread Length Outside Dia Full Length Minimum Embedment
GF/HSA-2533 1/4 20 5/8 1/4 1-1/2 1
GF/HSA-2534 1/4 20 5/8 1/4 1-3/4 1
GF/HSA-2535 1/4 20 3/4 1/4 2 1-1/8
GF/HSA-2536 1/4 20 7/8 1/4 2-1/2 1-1/8
GF/HSA-2537 5/16 18 3/4 5/16 2 1-1/8
GF/HSA-2538 5/16 18 7/8 5/16 2-1/2 1-1/4
GF/HSA-2539 5/16 18 1 5/16 3 1-1/4
GF/HSA-2540 3/8 16 3/4 3/8 2 1-1/4
GF/HSA-2541 3/8 16 7/8 3/8 2-1/2 1-1/2
GF/HSA-2542 3/8 16 1 3/8 3 1-1/2
GF/HSA-2543 3/8 16 1-1/8 3/8 4 1-1/2
GF/HSA-2544 3/8 16 1-1/8 3/8 5 2
GF/HSA-2545 1/2 12/13 3/4 1/2 2 1-1/4
GF/HSA-2546 1/2 12/13 7/8 1/2 2-1/2 1-1/2
GF/HSA-2547 1/2 12/13 1 1/2 3 1-1/2
GF/HSA-2548 1/2 12/13 1-1/8 1/2 4 1-1/2
GF/HSA-2549 1/2 12/13 1-1/8 1/2 5 2
GF/HSA-2550 5/8 11 1 5/8 3 1-1/2
GF/HSA-2551 5/8 11 1-1/4 5/8 4 1-1/2
GF/HSA-2552 5/8 11 1-1/2 5/8 5 2
GF/HSA-2553 5/8 11 2 5/8 6 2-1/2

Dimensions in MM
Cat No Thread Size Pitch Thread Length Outside Dia Full Length Minimum Embedment
GF/HSA-2554 M-6 1 15-M 6-M 40-M 25-M
GF/HSA-2555 M-6 1 18-M 6-M 50-M 25-M
GF/HSA-2556 M-6 1 20-M 6-M 60-M 25-M
GF/HSA-2557 M-8 1.25 15-M 8-M 40-M 25-M
GF/HSA-2558 M-8 1.25 18-M 8-M 50-M 25-M
GF/HSA-2559 M-8 1.25 20.M 8-M 60-M 25-M
GF/HSA-2560 M-8 1.25 25-M 8-M 75-M 30-M
GF/HSA-2561 M-8 1.25 30-M 8-M 100-M 30-M
GF/HSA-2562 M-10 1.50 18-M 10-M 50-M 25-M
GF/HSA-2563 M-10 1.50 25-M 10-M 75-M 30-M
GF/HSA-2564 M-10 1.50 30-M 10-M 100-M 30-M
GF/HSA-2565 M-10 1.50 30-M 10-M 150-M 30-M
GF/HSA-2566 M-12 1.75 20-M 12-M 60-M 25-M
GF/HSA-2567 M-12 1.75 25-M 12-M 75-M 30-M
GF/HSA-2568 M-12 1.75 30-M 12-M 100-M 30-M
GF/HSA-2569 M-12 1.75 30-M 12-M 150-M 30-M
GF/HSA-2570 M-16 2 25-M 16-M 75-M 30-M
GF/HSA-2571 M-16 2 30-M 16-M 100-M 30-M
GF/HSA-2572 M-16 2 30-M 16-M 125-M 30-M
GF/HSA-2573 M-16 2 30-M 16-M 150-M 30-M

Article No :- 803

APPLICATION & INSTALLATION
Drill to specify diameter and depth.

Use setting tool & hammer to drive plug in.

Tighten the anchor to the specified torque.

TOP

 

 

Hit Pin (zinc alloy body)

Article No :- 804

 

The Zinc alloy anchor is precision die cast light duty anchor. It consists of cylindrical alloy body and a expander which Zinc Plated steel pin which expands the bottom of anchor so that the fixture is locked in the required place. Suitable for electrical fittings sign boards, etc.

 
 
 
 
     

Article No :- 804

Dimensions in Inches
Cat No Outside Dia Length Drill Size Minimum Embedment
GF/ZHP-2574 3/16 7/8 3/16 1/2
GF/ZHP-2575 3/16 1 3/16 1/2
GF/ZHP-2576 1/4 7/8 1/4 1/2
GF/ZHP-2577 1/4 1 1/4 1/2
GF/ZHP-2578 1/4 1-1/4 1/4 5/8
GF/ZHP-2579 1/4 1-1/2 1/4 5/8
GF/ZHP-2580 1/4 2 1/4 5/8

Article No :- 804

Dimensions in MM
Cat No Outside Dia Length Drill Size Minimum Embedment

GF/ZHP-2581

 M-5 22 M 5 M 12 M

GF/ZHP-2582

 M-5 25 M 5 M 12 M

GF/ZHP-2583

 M-6 22 M 6 M 12 M

GF/ZHP-2584

 M-6 25 M 6 M 12 M

GF/ZHP-2585

 M-6 30 M 6 M 14 M

GF/ZHP-2586

 M-6 35 M 6 M 14 M

GF/ZHP-2587

 M-6 40 M 6 M 16 M

Article No :- 804

APPLICATION & INSTALLATION
Drill to specify diameter and depth.

Insert
 

 Set by driving expander pin into head.

TOP

 

 

Sleeve Anchor

Article No :- 805

It's ideal to be used in the building materials with concrete, and fasten the wood slip, metal & plastic frame, rope, hanging cord , etc. It's easy and fast to be installed. Smooth and flat metal.

The Product is available in
MS-CARBON STEEL and STAINLESS STEEL 304  & 316

As per clients requirements

Article No :- 805

 

HEX ANCHOR NUT ANCHOR HOOK ANCHOR EYE ANCHOR
       

       

Article No :- 805

Dimensions in MM

Also Available in Inches

Cat  No

Size Anchor Hex

Cat  No

Size Anchor  Nut

Cat  No

Size Anchor Hook

Cat  No

Anchor Siz eye

GF/SH-2650

 8X50

GF/SH-2660

 8X45

GF/SH-2670

 8X50

GF/SH-2680

 8X50

GF/SH-2651

 8X60

GF/SH-2661

 8X70

GF/SH-2671

 10X60 GF/SH-2681 10X60

GF/SH-2652

 10X60

GF/SH-2662

 10X55

GF/SH-2672

 12X70 GF/SH-2682 12X70

GF/SH-2653

 10X80

GF/SH-2663

 10X75

GF/SH-2673

 12X100 GF/SH-2683